FNM02-A01

FNM02-A01 is module that combines digital inputs and outputs with encoder interface. The module has 1 encoder input, 4 digital inputs 24VDC with common end and LED indication of input circuit state and 4 non latching transistor outputs with common end and LED indication of the state in the output circuit.
Encoder input is designed for RS422 encoders. Inputs have common end. Encoder is connected with A,B and C signal. There is a possibility of supplying the encoder from module.Digital signal evaluation is done on request from CPU. There is no need for external load if outputs are connected directly to the inputs. Digital outputs have no short circuit protection. During the failure of CPU module digital outputs are in off state. After power up sequence output level is user selectable.

Order code: E01-206-A01

Type of counter                      A, B, C encoder signals
Speed                                     50kHz
Type of input                          RS422
Reset                                      Yes, C signal
Value                                      Double word signed int (4 byte)
Encoder power supply           150mA
Number of digital inputs         4
Type of inputs                       Type 1
Galvanic isolation                   Yes,optocoupled
Input voltage range              24 VDC
Logical 1 voltage                   >15VDC
Logical 0 voltage                   <5VDC
Input current                        10mA Max(on 24VDC)
Number of digital outputs     4
Galvanic isolation                  Yes,optocoupled
Output voltage range          24VDC
Logic "1" level                       L–1.5V
Logic "0"level                        0V
Output current                     500mA Max
Total output current            4A