ANM02-A14

ANM02-A12 is the analog module that has 4 output channels with 12-bit resolution.
Output part of module is used for assignment of analog values (current, voltage). Configuration of output type is performed by jumpers on module. The set data is one word per output. Calibration is done in software. Monotonicity with no missing codes is guarantied. Outputs are not protected. There are no effects of
improper connection of the terminals. On power-up all outputs are in zero state.

Order code: E01-204-A14

Number of analog outputs           4 analog
Output type                                 current (0-20mA, 4-20mA)
                                                    voltage (1-5V, 0-10V)
Setting time for full range swing  1ms
Configuration of output              By jumpers, independently for every channel
Output load for:                          0 – 10V ≥ 1KΩ
                                                   1 – 5V ≥ 500Ω
                                                   0 – 20mA, 4 – 20mA ≤ 600Ω
Maximum capacitive load           1uF
Maximum inductive load            1mH