ANM02-A13

ANM02-A12 is the analog module that has 6 differential input channels with maximal 16-bit resolution and 2 output channels with 12-bit resolution.Input part of circuit is used for accepting and processing of all standard analog signals (current, voltage and RTD). Simultaneously, every channel can accept different type of analog signal. The configuration of type of input according to channel is performed by jumpers on the module itself. The returned data is one word per input. Inputs operate in self-scan mode. Calibration is done in software.Monotonicity with no missing codes is guarantied. Inputs are not protected. There are no effects of improper connection of the terminals.Output part of module is used for assignment of analog values (current, voltage).Configuration of output type is performed by jumpers on module. The set data is one word per output. Calibration is done in software. Monotonicity with no missing codes is guarantied. Outputs are not protected. There are no effects of improper connection of the terminals. On power-up all outputs are in zero state.

Order code: E01-204-A12

Number of analog inputs                   4

Input type                                         • current (0-20mA, 4-20mA)
                                                          • voltage (1-5V, 0-10V, ±10V)
                                                          • RTD (Pt100 -200 to 850°C, Pt1000 -200 to 300°C)
Input configuration                           By jumpers, independently for each channel
Input inpedance                               ≥10kΩ for voltage, ≤300Ω for current inputs
Conversion time                                2ms
Sample repetition time                      2 – 10ms
Number of analog outputs               4
Output type                                     current (0-20mA, 4-20mA)
                                                         voltage (1-5V, 0-10V)
Setting time for full range swing      1ms
Configuration of output                   By jumpers, independently for every channel
Output load for:                              0 – 10V ≥ 1KΩ
                                                        1 – 5V ≥ 500Ω
                                                        – 20mA, 4 – 20mA ≤ 600Ω
Maximum capacitive load                1uF
Maximum inductive load                  1mH
Recommended cable length            200m shielded